Zivid 2 勘误表
有关所有型号和配件的所有勘误表,请参阅 完整的 Zivid 勘误表 。
错误代码 |
概括: |
版本: |
E-38 |
Capture hangs or fails on Intel GPUs when the application's OpenCL queue waits on an incomplete user event --- Workaround: Upgrade to Intel Compute Runtime 26.40.40196.8 or later, where the issue is fixed. If upgrading is not possible, complete every user event that the application's queue waits on before passing the queue to an SDK function or starting a capture. |
|
E-24 |
Zivid 2 恢复出厂设置按钮可能不起作用 --- 变通方案: https://support.zivid.com/en/latest/support/reset-button-failure.html |
|
E-16 |
与相同硬件配置的装有 Linux 系统的 PC 相比,Windows 上的捕获时间可能更长。 --- 解决方法: 锁定 GPU 核心和内存时钟速度可以减少捕获时间的波动(仅限 Nvidia GPU)。 |
|
E-15 |
Windows 上的捕获时间有时会更长(比正常时间长 1 秒以上) --- 变通方案: 在 Windows 的网络驱动设置中增加 "Receive Buffers" 和 "Transmit Buffers",以减少丢包的发生。 |
|
已修复的问题
错误代码 |
概括: |
版本: |
修复于: |
E-37 |
投影仪的热稳定功能会导致亮度设置为 0 时 2D 捕获图像出现亮度波动 |
|
v2.18.0 |
E-33 |
GenICam/HALCON 中的点云看起来比 Zivid Studio 更暗 |
|
v2.14.0 |
E-32 |
使用 Halcon 时,在捕获一个较低分辨率的点云后,再去捕获一个较高分辨率的点云可能会失败(仅限 GenICam) |
|
v2.14.0 |
E-30 |
导出的 PLY/PCD/XYZ 点云比 Zivid Studio 中更暗 |
|
v2.14.0 |
E-29 |
使用 Zivid::Experimental::Projection::showImage() 时,Zivid 2/2+ 可能会显示不正确的图像 |
|
v2.11.1 |
E-28 |
如果 PC 进程在捕获过程中中止,Zivid 2/2+ 可能会出现无响应/离线状态 |
|
v2.12.0 |
E-23 |
Zivid 2 上的固件更新在极少数情况下可能会因超时而失败 |
|
v2.14.0 |
E-17 |
在使用 Ubuntu 20.04 加 Intel GPU 的方案时发生错误 "CL_OUT_OF_RESOURCES" 或 "OpenGL error: GL_INVALID_OPERATION" |
|
v2.7.0 |
E-14 |
捕获期间抛出 "CameraImageTimeout" 或 "Timeout" 异常 |
|
v2.14.0 |
E-10 |
如果 PC 进程在捕获过程中中止,Zivid 2/2+ 可能会挂起,导致 15 秒后重新启动。 |
|
v2.13.0 |
E-9 |
Windows 上的 OpenCV assertion error 报错 |
|
v2.4.1 |