Software Upgrade

모든 구성 요소가 제대로 업데이트되었는지 확인하려면 일반 설치 전에 다음을 수행하십시오.

  1. PC에서 Control Panel → Uninstall a program 으로 이동합니다.

  2. Zivid 소프트웨어를 제거합니다.

  3. TeliCamSDK (x64)를 제거합니다.

  4. PC를 다시 시작합니다.

이제 일반 설치 단계를 따를 수 있습니다.

  1. 최신 Zivid Software 설치 프로그램을 다운로드하여 실행합니다.

  2. If you are using HALCON, check the option to install GenICam GenTL Producer (Experimental).

    ../../_images/zivid_installation_menu.png

  3. Open Zivid Studio and check that no errors occur to verify that the installation was successful.

    참고

    If you run into issues, you may need to install or update GPU drivers.

  4. Proceed to Network Configuration.

키보드에서 Ctrl + Alt + T 키를 눌러 터미널 창을 엽니다.

  1. 임시 폴더를 만듭니다:

    mkdir Zivid && cd Zivid

  2. Download all deb packages:

    wget \
https://downloads.zivid.com/sdk/releases/2.14.0+e4a0c4a9-1/u24/amd64/zivid_2.14.0+e4a0c4a9-1_amd64.deb \
https://downloads.zivid.com/sdk/releases/2.14.0+e4a0c4a9-1/u24/amd64/zivid-studio_2.14.0+e4a0c4a9-1_amd64.deb \
https://downloads.zivid.com/sdk/releases/2.14.0+e4a0c4a9-1/u24/amd64/zivid-tools_2.14.0+e4a0c4a9-1_amd64.deb \
https://downloads.zivid.com/sdk/releases/2.14.0+e4a0c4a9-1/u24/amd64/zivid-genicam_2.14.0+e4a0c4a9-1_amd64.deb

    wget \
https://downloads.zivid.com/sdk/releases/2.14.0+e4a0c4a9-1/u22/amd64/zivid_2.14.0+e4a0c4a9-1_amd64.deb \
https://downloads.zivid.com/sdk/releases/2.14.0+e4a0c4a9-1/u22/amd64/zivid-studio_2.14.0+e4a0c4a9-1_amd64.deb \
https://downloads.zivid.com/sdk/releases/2.14.0+e4a0c4a9-1/u22/amd64/zivid-tools_2.14.0+e4a0c4a9-1_amd64.deb \
https://downloads.zivid.com/sdk/releases/2.14.0+e4a0c4a9-1/u22/amd64/zivid-genicam_2.14.0+e4a0c4a9-1_amd64.deb

    wget \
https://downloads.zivid.com/sdk/releases/2.14.0+e4a0c4a9-1/u20/amd64/zivid_2.14.0+e4a0c4a9-1_amd64.deb \
https://downloads.zivid.com/sdk/releases/2.14.0+e4a0c4a9-1/u20/amd64/zivid-studio_2.14.0+e4a0c4a9-1_amd64.deb \
https://downloads.zivid.com/sdk/releases/2.14.0+e4a0c4a9-1/u20/amd64/zivid-tools_2.14.0+e4a0c4a9-1_amd64.deb \
https://downloads.zivid.com/sdk/releases/2.14.0+e4a0c4a9-1/u20/amd64/zivid-genicam_2.14.0+e4a0c4a9-1_amd64.deb

    참고

    SDK 2.10부터 Ubuntu 18.04에 대한 지원이 종료되었습니다. 이전 SDK 버전에 대한 Ubuntu 18.04 지침을 보려면 왼쪽 상단 모서리에서 기술 자료 버전을 변경하십시오.

    조심

    GenICam/HALCON 지원은 experimental입니다.

  3. 모든 패키지를 설치합니다:

    sudo apt update
sudo apt install ./*.deb

  4. Open Zivid Studio and check that no errors occur to verify that the installation was successful.

    참고

    If you run into issues, you may need to install or update GPU drivers.

  5. Proceed to Network Configuration.