Factory Reset Button

Zivid cameras has a factory reset button located on the back of the camera under the power connector.

Pressing the factory reset button will perform different actions depending on how long you press it:

Reset (power cycle):

Intermittent press or hold for less than 5 seconds.

Reset to factory IP address:

Hold for 5 to 10 seconds until the Power LED turns green

Revert to factory installed firmware:

Hold for more than 10 seconds until the Power LED turns yellow.

Warning

Zivid 2 has a known issue with the factory reset button. For more information, see Zivid Errata. Please refer to Reset Button Fails to Reset Network Configuration if you encounter issues with the factory reset button.