Software Installation

Before installing Zivid Software:

Note

Python and ROS require additional installation steps, please see Wrappers.

Select your OS:

  1. Download and run the latest Zivid Software installer.

  2. Check the option to install camera drivers.

    Note

    You will be notified if the drivers are already installed.

  3. Check the option to install GenICam GenTL Producer if you plan on using HALCON software.

    Caution

    GenICam/HALCON support is experimental.

    ../_images/zivid_installation_menu.png
  4. Once the installation is complete, re-plug the camera.

    Note

    The first time TeliCamSDK (x64) driver is installed you may have to reboot your computer. Please accept if prompted to reboot.

  5. For Zivid Two, after the installation, proceed to Zivid Two Network Configuration.

  1. Open a terminal window by pressing Ctrl + Alt + T keys on the keyboard.

    1. Create a temporary folder:

      mkdir Zivid
      
      cd Zivid
      
    2. Download all *.deb packages:

      wget \
      https://downloads.zivid.com/sdk/releases/2.9.0+4dbba385-1/u22/zivid-telicam-driver_3.0.1.1-3_amd64.deb \
      https://downloads.zivid.com/sdk/releases/2.9.0+4dbba385-1/u22/zivid_2.9.0+4dbba385-1_amd64.deb \
      https://downloads.zivid.com/sdk/releases/2.9.0+4dbba385-1/u22/zivid-studio_2.9.0+4dbba385-1_amd64.deb \
      https://downloads.zivid.com/sdk/releases/2.9.0+4dbba385-1/u22/zivid-tools_2.9.0+4dbba385-1_amd64.deb
      
      wget \
      https://downloads.zivid.com/sdk/releases/2.9.0+4dbba385-1/u20/zivid-telicam-driver_3.0.1.1-3_amd64.deb \
      https://downloads.zivid.com/sdk/releases/2.9.0+4dbba385-1/u20/zivid_2.9.0+4dbba385-1_amd64.deb \
      https://downloads.zivid.com/sdk/releases/2.9.0+4dbba385-1/u20/zivid-studio_2.9.0+4dbba385-1_amd64.deb \
      https://downloads.zivid.com/sdk/releases/2.9.0+4dbba385-1/u20/zivid-tools_2.9.0+4dbba385-1_amd64.deb
      
      wget \
      https://downloads.zivid.com/sdk/releases/2.9.0+4dbba385-1/u18/zivid-telicam-driver_3.0.1.1-3_amd64.deb \
      https://downloads.zivid.com/sdk/releases/2.9.0+4dbba385-1/u18/zivid_2.9.0+4dbba385-1_amd64.deb \
      https://downloads.zivid.com/sdk/releases/2.9.0+4dbba385-1/u18/zivid-studio_2.9.0+4dbba385-1_amd64.deb \
      https://downloads.zivid.com/sdk/releases/2.9.0+4dbba385-1/u18/zivid-tools_2.9.0+4dbba385-1_amd64.deb
      

      Note

      Support for Ubuntu 16.04 is removed since SDK 2.7. To see Ubuntu 16.04 instructions for an earlier SDK version, change the Knowledge Base version in the top left corner.

    3. Install all packages:

      sudo apt install ./*.deb
      
    4. Once the installation is complete, re-plug the camera.

    5. For Zivid Two, after the installation, proceed to Zivid Two Network Configuration.