Zivid 2+ Errata

For a table of all erratas for all models and accessories see Complete Zivid Errata.

Key

Summary:

Revisions:

E-23

Firmware update on Zivid 2 can in rare cases fail with timeout

—

Workaround: The situation can be resolved by power-cycling the camera, restarting the application and doing FW upgrade again.

  • Rev A0

E-16

Capture time can be higher on Windows compared to Linux for identical hardware.

—

Workaround: None

  • Rev A0

E-15

Capture time on Windows can occasionally be longer (more than 1 second longer than normal)

—

Workaround: Increase “Receive Buffers” and “Transmit Buffers” in the network driver settings in Windows to reduce the occurrence of packet loss.

  • Rev A0

Fixed issues

Key

Summary:

Revisions:

Fixed in:

E-33

GenICam/HALCON point clouds appear darker than in Zivid Studio

  • Rev A0

v2.14.0

E-32

Capturing a higher resolution point cloud after a lower resolution point cloud fails in Halcon (GenICam only)

  • Rev A0

v2.14.0

E-30

Exported PLY/PCD/XYZ point clouds appear darker than in Zivid Studio

  • Rev A0

v2.14.0

E-29

Zivid 2/2+ can show incorrect image when using Zivid::Experimental::Projection::showImage()

  • Rev A0

v2.11.1

E-28

Zivid 2/2+ may appear unresponsive/offline if PC process is aborted mid capture

  • Rev A0

v2.12.0

E-14

”CameraImageTimeout” or “Timeout” exception thrown during capture

  • Rev A0

v2.14.0

E-10

Zivid 2/2+ may hang if the PC process is aborted mid-capture, leading to a reboot after 15 seconds.

  • Rev A0

v2.13.0