在Ubuntu上安装Zivid

1. 按下键盘上的 Ctrl + Alt + T 键打开终端窗口。

   1. 创建一个临时文件夹：

      mkdir Zivid
      
      cd Zivid
      

   2. 下载所有 *.deb 包：

      Ubuntu 22.04

      wget \
      https://www.zivid.com/hubfs/softwarefiles/releases/2.8.1+dd4dffea-1/u22/zivid-telicam-driver_3.0.1.1-3_amd64.deb \
      https://www.zivid.com/hubfs/softwarefiles/releases/2.8.1+dd4dffea-1/u22/zivid_2.8.1+dd4dffea-1_amd64.deb \
      https://www.zivid.com/hubfs/softwarefiles/releases/2.8.1+dd4dffea-1/u22/zivid-studio_2.8.1+dd4dffea-1_amd64.deb \
      https://www.zivid.com/hubfs/softwarefiles/releases/2.8.1+dd4dffea-1/u22/zivid-tools_2.8.1+dd4dffea-1_amd64.deb
      

      Ubuntu 20.04

      wget \
      https://www.zivid.com/hubfs/softwarefiles/releases/2.8.1+dd4dffea-1/u20/zivid-telicam-driver_3.0.1.1-3_amd64.deb \
      https://www.zivid.com/hubfs/softwarefiles/releases/2.8.1+dd4dffea-1/u20/zivid_2.8.1+dd4dffea-1_amd64.deb \
      https://www.zivid.com/hubfs/softwarefiles/releases/2.8.1+dd4dffea-1/u20/zivid-studio_2.8.1+dd4dffea-1_amd64.deb \
      https://www.zivid.com/hubfs/softwarefiles/releases/2.8.1+dd4dffea-1/u20/zivid-tools_2.8.1+dd4dffea-1_amd64.deb
      

      Ubuntu 18.04

      wget \
      https://www.zivid.com/hubfs/softwarefiles/releases/2.8.1+dd4dffea-1/u18/zivid-telicam-driver_3.0.1.1-3_amd64.deb \
      https://www.zivid.com/hubfs/softwarefiles/releases/2.8.1+dd4dffea-1/u18/zivid_2.8.1+dd4dffea-1_amd64.deb \
      https://www.zivid.com/hubfs/softwarefiles/releases/2.8.1+dd4dffea-1/u18/zivid-studio_2.8.1+dd4dffea-1_amd64.deb \
      https://www.zivid.com/hubfs/softwarefiles/releases/2.8.1+dd4dffea-1/u18/zivid-tools_2.8.1+dd4dffea-1_amd64.deb
      

      Ubuntu 16.04

      备注

      Support for Ubuntu 16.04 is removed since SDK 2.7. To see Ubuntu 16.04 instructions for an earlier SDK version, change the Knowledge Base version in the top left corner.

   3. 安装所有软件包：

      sudo apt install ./*.deb
      

   4. 安装完成后，重新接入相机。

   5. 对于Zivid Two，在安装完成后，接下来进行 Zivid Two网络配置 。