Software Upgrade¶

In order to ensure that all components are properly updated, perform the following before the normal installation.

On your PC, navigate to Control Panel → Uninstall a program.
Uninstall Zivid Software.
Uninstall TeliCamSDK (x64).
Restart your PC.

Now you may follow the normal installation steps.

Download and run the latest Zivid Software installer.
Check the option to install camera drivers.

Note

You will be notified if the drivers are already installed.
Check the option to install GenICam GenTL Producer if you plan on using HALCON software.

Caution

GenICam/HALCON support is experimental.
Once the installation is complete, re-plug the camera.

Note

The first time TeliCamSDK (x64) driver is installed you may have to reboot your computer. Please accept if prompted to reboot.
For Zivid Two, after the installation, proceed to Zivid Two Network Configuration.

Open a terminal window by pressing Ctrl + Alt + T keys on the keyboard.

Create a temporary folder:
mkdir Zivid cd Zivid

Download all *.deb packages:

wget \
https://www.zivid.com/hubfs/softwarefiles/releases/2.4.2+1a2e8cfb-1/u20/zivid-telicam-driver_3.0.1.1-3_amd64.deb \
https://www.zivid.com/hubfs/softwarefiles/releases/2.4.2+1a2e8cfb-1/u20/zivid_2.4.2+1a2e8cfb-1_amd64.deb \
https://www.zivid.com/hubfs/softwarefiles/releases/2.4.2+1a2e8cfb-1/u20/zivid-studio_2.4.2+1a2e8cfb-1_amd64.deb \
https://www.zivid.com/hubfs/softwarefiles/releases/2.4.2+1a2e8cfb-1/u20/zivid-tools_2.4.2+1a2e8cfb-1_amd64.deb

wget \
https://www.zivid.com/hubfs/softwarefiles/releases/2.4.2+1a2e8cfb-1/u18/zivid-telicam-driver_3.0.1.1-3_amd64.deb \
https://www.zivid.com/hubfs/softwarefiles/releases/2.4.2+1a2e8cfb-1/u18/zivid_2.4.2+1a2e8cfb-1_amd64.deb \
https://www.zivid.com/hubfs/softwarefiles/releases/2.4.2+1a2e8cfb-1/u18/zivid-studio_2.4.2+1a2e8cfb-1_amd64.deb \
https://www.zivid.com/hubfs/softwarefiles/releases/2.4.2+1a2e8cfb-1/u18/zivid-tools_2.4.2+1a2e8cfb-1_amd64.deb

wget \
https://www.zivid.com/hubfs/softwarefiles/releases/2.4.2+1a2e8cfb-1/u16/zivid-telicam-driver_3.0.1.1-3_amd64.deb \
https://www.zivid.com/hubfs/softwarefiles/releases/2.4.2+1a2e8cfb-1/u16/zivid_2.4.2+1a2e8cfb-1_amd64.deb \
https://www.zivid.com/hubfs/softwarefiles/releases/2.4.2+1a2e8cfb-1/u16/zivid-studio_2.4.2+1a2e8cfb-1_amd64.deb \
https://www.zivid.com/hubfs/softwarefiles/releases/2.4.2+1a2e8cfb-1/u16/zivid-tools_2.4.2+1a2e8cfb-1_amd64.deb

Install all packages:
sudo dpkg -i *.deb
Once the installation is complete, re-plug the camera.
For Zivid Two, after the installation, proceed to Zivid Two Network Configuration.