Default Settings

The table below shows the default settings for different Zivid camera models.

	Settings	Range	Zivid Two M70	Zivid Two L100	Zivid One+ S	Zivid One+ M	Zivid One+ L
Vision Engine		Phase / Stripe [1]	Phase	Phase	Phase	Phase	Phase
Exposure	Exposure Time (us)	1677 - 100000 [2]	5000	5000	6500	6500	6500
	Aperture (f-number)	32.0 - 1.40 [3]	2.38	2.38	5.66	5.66	5.66
	Gain	1.0 - 16.0	1.0	1.0	1.0	1.0	1.0
	Projector Brightness	0 - 1.8 [4]	1.8	1.8	1.0	1.5	1.8
Correction Filters	Noise Enabled		Yes	Yes	Yes	Yes	Yes
	Noise Threshold	0 - 100	5	5	7	7	7
	Outlier Enabled		Yes	Yes	Yes	Yes	Yes
	Outlier Threshold	0 - 100	10	10	5	5	25
	Reflection		Yes	Yes	No	No	No
	[1] Contrast Distortion Correction Enabled		Yes	Yes	No	No	No
	[1] Contrast Distortion Correction Strength	0 - 1.0	0.3	0.3	0.4	0.4	0.4
Removal Filters	[1] Contrast Distortion Removal Enabled		No	No	No	No	No
	[1] Contrast Distortion Removal Threshold	0 - 1.0	0.2	0.2	0.5	0.5	0.5
	Gaussian Enabled		Yes	Yes	No	No	No
	Gaussian Sigma	0.5 - 5.0	1.0	1.0	1.5	1.5	1.5
Color	Red Balance	1.0 - 8.0	1.0	1.0	1.0	1.0	1.0
	Green Balance	1.0 - 8.0	1.0	1.0	1.0	1.0	1.0
	Blue Balance	1.0 - 8.0	1.0	1.0	1.0	1.0	1.0
	Gamma	0.25 - 1.5	1.0	1.0	1.0	1.0	1.0
	Mode [1]	Automatic / UseFirstAcquisition / ToneMapping	Automatic	Automatic	Automatic	Automatic	Automatic

[1] (1,2,3,4,5,6)

Experimental

[2]

Zivid Two has a minimum exposure time of 1677 us. Zivid One+ has a minimum of 6500 us.

[3]

Zivid One+ has a minimum aperture of 1.40. Zivid Two has a minimum of 1.80.

[4]

Projector brightness below 0.25 is not recommended, except for 2D captures.

Settings Info

It is possible to read various settings info from the SDK.

Default camera settings:

C++

source

const auto cameraInfo = camera.info();
auto defaultSettings = Zivid::Experimental::SettingsInfo::defaultValue<Zivid::Settings>(cameraInfo);
defaultSettings.acquisitions().emplaceBack(
    Zivid::Experimental::SettingsInfo::defaultValue<Zivid::Settings::Acquisition>(cameraInfo));

Default setting value:

C++

source

const auto cameraInfo = camera.info();
const auto defaultSettingValue =
    Zivid::Experimental::SettingsInfo::defaultValue<Zivid::Settings::Acquisition::Aperture>(cameraInfo);

Valid setting range (for settings of types double and duration):

C++

source

const auto cameraInfo = camera.info();
const auto validSettingRange =
    Zivid::Experimental::SettingsInfo::validRange<Zivid::Settings::Acquisition::Aperture>(cameraInfo);

Valid setting values (for settings of types bool and enum):

C++

source

const auto cameraInfo = camera.info();
const auto validSettingValues = Zivid::Experimental::SettingsInfo::validValues<
    Zivid::Settings::Processing::Filters::Reflection::Removal::Enabled>(cameraInfo);