Status LED Indication¶
Zivid Two camera contains three status indication LEDs:
Power
Ethernet Link
Ethernet Activity
The following image describes what the LED colors indicate.
Zivid One+ camera contains one status indication LED with four different indication modes:
Color |
Indication |
Status |
|---|---|---|
Blue |
Rapid blinking |
No USB connection |
Blue |
Continuously on with short off period |
USB is enumerated and the USB device drivers on the PC are installed and working |
White |
Continuously on with short off period |
Zivid Software is communicating with the projector and “heartbeats” are being received |
Red |
Blinking |
Error 1 |
Note
Older Zivid One+ cameras have a thick black rubber gasket so indication LEDs are not visible.
- 1
For Rev-C Zivid One+ cameras with SDK version 2.3 or lower, there is an errata causing the status LED to be red even if the camera is properly working. You should rely only on error messages from SDK.