Default Settings

The table below shows the default settings for different Zivid camera models.

	Settings	Range	Zivid Two	Zivid One+ S	Zivid One+ M	Zivid One+ L
Vision Engine		Phase / Stripe 1 2	Phase	Phase	Phase	Phase
Exposure	Exposure Time (us)	1677 - 100000 3	5000	6500	6500	6500
	Aperture (f-number)	32.0 - 1.40 4	2.38	5.66	5.66	5.66
	Gain	1.0 - 16.0	1.0	1.0	1.0	1.0
	Projector Brightness	0 - 1.8 5	1.8	1.0	1.5	1.8
Correction Filters	Noise Enabled		Yes	Yes	Yes	Yes
	Noise Threshold	0 - 100	5	7	7	7
	Outlier Enabled		Yes	Yes	Yes	Yes
	Outlier Threshold	0 - 100	10	5	5	25
	Reflection		Yes	No	No	No
	Contrast Distortion 1 Correction Enabled		Yes	No	No	No
	Contrast Distortion 1 Correction Strength	0 - 1.0	0.3	0.4	0.4	0.4
Removal Filters	Contrast Distortion 1 Removal Enabled		No	No	No	No
	Contrast Distortion 1 Removal Threshold	0 - 1.0	0.2	0.5	0.5	0.5
	Gaussian Enabled		Yes	No	No	No
	Gaussian Sigma	0.5 - 5.0	1.0	1.5	1.5	1.5
Color	Red Balance	1.0 - 8.0	1.0	1.0	1.0	1.0
	Green Balance	1.0 - 8.0	1.0	1.0	1.0	1.0
	Blue Balance	1.0 - 8.0	1.0	1.0	1.0	1.0
	Gamma	0.25 - 1.5	1.0	1.0	1.0	1.0
	Tone Mapping 1	HDR Only / Always	HDR Only	HDR Only	HDR Only	HDR Only

1(1,2,3,4,5,6)

Experimental

2

Stripe Engine only implemented on Zivid One+.

3

Zivid Two has a minimum exposure time of 1677 us. Zivid One+ has a minimum of 6500 us.

4

Zivid One+ has a minimum aperture of 1.40. Zivid Two has a minimum of 1.80.

5

Projector brightness below 0.25 is not recommended, except for 2D captures.