Porting Guide for C# SDK¶

Introduction
Initialize
Connect
Configure
Capture
Visualize
Save
Misc

Introduction ¶

This guide focus on changes to the API. The flow follows that of a typical application based on the Zivid SDK. First, an example of the code from 1.8.1 will be shown and then the 2.0 example.

For example:

1.8.1	2.0
You will find code snippets from SDK 1.8.1 on this side,	and code snippets from SDK 2.0 on this side.

Initialize ¶

No change to how the application is initialized.

var zivid = new Zivid.NET.Application();

Connect ¶

No change to the default connection.

var camera = zivid.ConnectCamera();

Connect - Specific Camera & List Cameras¶

The serial number is now organized under Zivid.NET.CameraInfo. This is a member of Zivid.NET.Camera which is accessed via Zivid.NET.Camera.Info.

1.8.1

2.0

var camera = zivid.ConnectCamera(new Zivid.NET.SerialNumber("2020C0DE"));

var camera = zivid.ConnectCamera(new Zivid.NET.CameraInfo.SerialNumber("2020C0DE"));

var cameras = zivid.Cameras;
foreach (var camera in cameras)
{
    Console.WriteLine("Detected camera: {0}", camera.SerialNumber);
}

var cameras = zivid.Cameras;
foreach (var camera in cameras)
{
    Console.WriteLine("Detected camera: {0}", camera.Info.SerialNumber);
}

Connect - File Camera¶

1.8.1	2.0
var zdfFile = "MiscObjects.zdf"; var camera = zivid.CreateFileCamera(zdfFile);	var fileCamera = "FileCameraZividOne.zfc"; var camera = zivid.CreateFileCamera(fileCamera);

The change here is that the File Camera has received its own file type. A Zivid File Camera (ZFC) contains more information than a normal Zivid Data File (ZDF).

Configure ¶

Settings 3D - Capture Assistant¶

1.8.1

2.0

var suggestSettingsParameters =
    new Zivid.NET.CaptureAssistant.SuggestSettingsParameters(
        Duration.FromMilliseconds(900),
        Zivid.NET.CaptureAssistant.AmbientLightFrequency.none);

var settingsList = Zivid.NET.CaptureAssistant.SuggestSettings(
    camera, suggestSettingsParameters);

var suggestSettingsParameters = new Zivid.NET.CaptureAssistant.SuggestSettingsParameters
{
    AmbientLightFrequency =
        Zivid.NET.CaptureAssistant.SuggestSettingsParameters.AmbientLightFrequencyOption.none,
    MaxCaptureTime = Duration.FromMilliseconds(900)
};
var settings = Zivid.NET.CaptureAssistant.Assistant.SuggestSettings(camera, suggestSettingsParameters);

Note that SuggestSettings moved into a new class Assistant in the CaptureAssistant namespace.

Settings 3D - Manual Configuration¶

Zivid.NET.Settings¶

Zivid SDK 2.0 introduces major changes to the capture settings. The most significant change is that a single Zivid.NET.Settings object now contains complete settings for any capture task including multi-acquisition capture (HDR). This is in contrast to SDK 1.x, in which a HDR capture was represented by a list of Settings objects (or a list of Frames that could be merged at a later time).

In SDK 2.0, a Settings object is divided into two main parts:

Zivid.NET.Settings.Acquisitions: A list of Zivid.NET.Settings.Acquisition, which specify the parameters of image-acquisition on the Zivid camera itself. Each Acquisition includes settings such as camera aperture (f-number) and projector brightness.
Zivid.NET.Settings.Processing: Specifies the parameters of the point-cloud processing occurring on the PC GPU, based on the images acquired on the camera. This includes filtering settings and color settings.

Secondly, the Settings is no longer given to the camera before capture as a separate operation. In SDK 2.0, settings are passed as an argument to Zivid.NET.Camera.capture(Zivid.NET.Settings). The user may specify as few or as many parts of Zivid.NET.Settings as desired. The remaining camera-model appropriate defaults will be applied at the time of calling Capture().

Lastly, 2D-capture is performed by passing a Zivid.NET.Settings2D to the same capture function, Zivid.NET.Camera.Capture(Settings2D). The new Settings2D is structured similarly to the new Settings.

Zivid.NET.Settings:Acquisition(s)¶

In SDK 1, a HDR capture was specified by constructing a list of Settings. In SDK 2.0, everything is contained in a single Settings, and a HDR capture is specified by letting it contain multiple Zivid.NET.Settings.Acquisition. These may be created at the time of constructing the Settings, or added later with e.g. settings.Acquisitions.Add(acquisitionSettings). To see an example, see CaptureHDRCompleteSettings sample.

The following is a summary of the relation between members of old settings and the members of the new Zivid.NET.Settings.Acquisition:

`Zivid.NET.Settings.ExposureTime`	→	`Zivid.NET.Settings.Acquisition.ExposureTime`
`Zivid.NET.Settings.Gain`	→	`Zivid.NET.Settings.Acquisition.Gain`
`Zivid.NET.Settings.Brightness`	→	`Zivid.NET.Settings.Acquisition.Brightness`
`Zivid.NET.Settings.Iris`	→	`Zivid.NET.Settings.Acquisition.Aperture` 1
`Zivid.NET.Settings.Bidirectional`	→	This setting has been removed

1: The setting to control the Iris/Aperture is changed. The f-number unit is introduced. To change your iris values with equivalent aperture f-numbers, check out the IrisToAperture conversion list found here

Zivid.NET.Settings.Processing¶

Filters

A new filter Contrast Distortion is introduced, Zivid.NET.Settings.Processing.Experimental.ContrastDistortion.

Note

Contrast Distortion filter does not have anything to do with the old Contrast value.

Filters are applied after acquisitions and are organized under Zivid.NET.Settings.Processing.Filters. The following shows how filters have moved, and in some cases changed.

`Zivid.NET.Settings.Filters.Saturated`	→	This filter is removed. It is always enabled.
`Zivid.NET.Settings.Filter.Gaussian`	→	`Zivid.NET.Settings.Processing.Filters.Smoothing.Gaussian`
`Zivid.NET.Settings.Filter.Outlier`	→	`Zivid.NET.Settings.Processing.Filters.Outlier.Removal`
`Zivid.NET.Settings.Filter.Reflection`	→	`Zivid.NET.Settings.Processing.Filters.Reflection.Removal`
`Zivid.NET.Settings.Contrast`	→	This filter is replaced with a new filter - `Zivid.NET.Settings.Processing.Filters.Noise.Removal` 2

2: The contrast filter removed points based on the contrast value threshold. The noise filter removes points based on the SNR value threshold. SNR and contrast values are computed differently, and the two filters are therefore different. Consider the noise filter as a contrast filter improvement. To achieve similar results, different threshold values must be applied. Similar value to a Contrast threshold of 3 is the Noise threshold value of 7.

Color Balance

Color balance is improved with SDK 2.0. Color balance settings now only affects the colors of the point cloud, and has no effect on the computed XYZ point coordinates.

`Zivid.NET.Settings.BlueBalance`	→	`Zivid.NET.Settings.Processing.Color.Balance.Blue`
`Zivid.NET.Settings.RedBalance`	→	`Zivid.NET.Settings.Processing.Color.Balance.Red`
N/A	→	`Zivid.NET.Settings.Processing.Color.Balance.Green` (New)

Example: Single Frame → Single Acquisition in Settings¶

1.8.1

2.0

camera.UpdateSettings(settings =>
{
     settings.Iris = 20;
     settings.ExposureTime = Duration.FromMicroseconds(10000);
     settings.Brightness = 1;
     settings.Gain = 1;
     settings.Filters.Contrast.Enabled = true;
     settings.Filters.Contrast.Threshold = 5;
});
var frame = camera.Capture();

var settings = new Zivid.NET.Settings
{
    Acquisitions = { new Zivid.NET.Settings.Acquisition{
        Aperture = 5.66,
        ExposureTime = Duration.FromMicroseconds(8333),
        Brightness = 1,
        Gain = 1} },
    Processing = { Filters = { Noise = { Removal = { Enabled = true, Threshold = 5.0 } } } }
};
var frame = camera.Capture(settings);

Note how Settings is now provided as an argument to the capture function, not given to the camera beforehand.

Example: HDR Frame → Multiple Acquisitions in Settings¶

Zivid.NET.Settings now contains a vector to hold settings for multiple acquisitions.

1.8.1

2.0

svar frames = new List<Zivid.NET.Frame>();
foreach (var iris in new ulong[] { 14, 21, 35 })
{
    camera.UpdateSettings(settings =>
    {
        settings .Iris = iris;
    });
    frames.Add(camera.Capture());
}
var hdrFrame = Zivid.NET.HDR.CombineFrames(frames);

var settings = new Zivid.NET.Settings();
foreach (var aperture in new double[] { 11.31, 5.66, 2.83 })
{
    var acquisitionSettings = new Zivid.NET.Settings.Acquisition{ Aperture = aperture };
    settings.Acquisitions.Add(acquisitionSettings);
}
var frame = camera.Capture(settings);

Example: From YML File¶

Since Zivid.NET.Camera does not hold settings in the new SDK, loading settings from file is done on Zivid.NET.Settings.

1.8.1	2.0
camera.SetSettings(new Zivid.NET.Settings("Frame01.yml"));	var settings = new Zivid.NET.Settings("Settings.yml");

Alternatively, while connecting to the camera:

1.8.1	2.0
var camera = zivid.ConnectCamera(new Zivid.NET.Settings("Frame01.yml"));	N/A

The main change here is that the input file contains settings for all acquisitions. Previously we had one file per Frame. Now we have one file with everything. Note also the name change from Frame to Acquisition in this context.

Complete comparison of old and new .yaml for Zivid.NET.Settings

1.8.1

2.0

__version__: 3
Settings:
    Bidirectional: no
    BlueBalance: 1.081000
    Brightness: 1.000000
    ExposureTime: 10000
    Filters:
        Contrast:
            Enabled: yes
            Threshold: 3.000000
        Gaussian:
            Enabled: yes
            Sigma: 1.500000
        Outlier:
            Enabled: yes
            Threshold: 20.000000
        Reflection:
            Enabled: yes
        Saturated:
            Enabled: yes
    Gain: 1.000000
    Iris: 17
    RedBalance: 1.709000

__version__: 3
Settings:
    Bidirectional: no
    BlueBalance: 1.081000
    Brightness: 1.000000
    ExposureTime: 10000
    Filters:
        Contrast:
            Enabled: yes
            Threshold: 3.000000
        Gaussian:
            Enabled: yes
            Sigma: 1.500000
        Outlier:
            Enabled: yes
            Threshold: 20.000000
        Reflection:
            Enabled: yes
        Saturated:
            Enabled: yes
    Gain: 1.000000
    Iris: 27
    RedBalance: 1.709000

__version__: 3
Settings:
    Bidirectional: no
    BlueBalance: 1.081000
    Brightness: 1.000000
    ExposureTime: 10000
    Filters:
        Contrast:
            Enabled: yes
            Threshold: 3.000000
        Gaussian:
            Enabled: yes
            Sigma: 1.500000
        Outlier:
            Enabled: yes
            Threshold: 20.000000
        Reflection:
            Enabled: yes
        Saturated:
            Enabled: yes
    Gain: 4.000000
    Iris: 35
    RedBalance: 1.709000

__version__:
    serializer: 1
    data: 4
Settings:
    Acquisitions:
        - Acquisition:
              Aperture: 7.98
              Brightness: 1.8
              ExposureTime: 10000
              Gain: 1
        - Acquisition:
              Aperture: 4.02
              Brightness: 1.8
              ExposureTime: 10000
              Gain: 1
        - Acquisition:
              Aperture: 2.81
              Brightness: 1.8
              ExposureTime: 10000
              Gain: 4
    Processing:
        Color:
            Balance:
                Blue: 1.081
                Green: 1
                Red: 1.709
        Filters:
            Experimental:
                ContrastDistortion:
                    Correction:
                        Enabled: no
                        Strength: 0.4
                    Removal:
                        Enabled: no
                        Threshold: 0.5
            Noise:
                Removal:
                    Enabled: yes
                    Threshold: 7
            Outlier:
                Removal:
                    Enabled: yes
                    Threshold: 5
            Reflection:
                Removal:
                    Enabled: yes
            Smoothing:
                Gaussian:
                    Enabled: yes
                    Sigma: 1.5

Settings 2D¶

The general approach to configure Zivid.NET.Settings2D is equivalent to configuring Zivid.NET.Settings. See Settings 3D Manual Configuration

Zivid.NET.Settings2D.Acquisition (Acquisition settings - former Frame settings)¶

The changes made on Zivid.NET.Settings2D.Acquisition are equivalent to the changes made on Zivid.NET.Settings.Acquisition, see Acquisition Settings (3D). Note that 2D settings allow only one acquisition (multi acquisition 2D HDR is not possible).

Zivid.NET.Settings2D.Processing¶

Note that we don’t support filters for 2D settings.

Color Balance

Color balance is now added for 2D settings. Configuring Zivid.NET.Settings2D.Processing.Color.Balance is the same as configuring Zivid.NET.Settings.Processing.Color.Balance, see Color Balance (3D).

Capture ¶

3D - Single Acquisition¶

The new Zivid.NET.Camera.Capture() API always takes settings as input.

1.8.1	2.0
var frame = camera.Capture();	var frame = camera.Capture(settings);

3D - Multi Acquisition HDR¶

Whether the capture is a single acquisition or multi-acquisition (HDR) is given by the input parameter settings. The call signature is always Zivid.NET.Camera.Capture(Zivid.NET.Settings), regardless of whether it is single acquisition or HDR.

2D Acquisition¶

The API to capture 2D image doesn’t have 2D in capture, i.e. it is Zivid.NET.Camera.Capture() instead of Zivid.NET.Camera.Capture2D(). Whether Zivid.NET.Camera.Capture() produces 2D or 3D is given by the input parameter, Zivid.NET.Settings2D or Zivid.NET.Settings.

1.8.1	2.0
var frame2D = camera.Capture2D(settings); var image = frame2D.Image<Zivid.NET.RGBA8>();	var frame2D = camera.Capture(settings2D); var image = frame2D.ImageRGBA();

The method ImageRGBA() returns a Zivid.NET.ImageRGBA instance, from which color values may be accessed through methods ToArray() and ToByteArray(). These return a 2D array of ColorRGBA or a 3D array of byte, respectively.

Point Cloud¶

Before SDK 2.0 the point cloud was accessed via Zivid.NET.Frame.getPointCloud(). This API copied all data from GPU to system memory in a 1200x1920x7 matrix, see Point Cloud. In SDK 2.0 you first get a handle to the point cloud data on the GPU through Zivid.NET.Frame.pointCloud(). This call does not perform any copying from GPU memory. Then you can selectively copy data based on what is required. You can even copy directly into your own pre-allocated memory.

A new point-cloud quality value has also been introduced: Signal-to-Noise-Ratio (SNR). This replaces the old Contrast value, and is always a non-negative non-NaN number.

Complete list of new output data-formats and how to copy them from the GPU:

Return type	Functions for copying from GPU	Data per pixel	Total data copied
`float[height,width,3]`	`PointCloud.CopyPointsXYZ()`	12 bytes	28 MB
`float[height,width,4]`	`PointCloud.CopyPointsXYZW()`	16 bytes	37 MB
`float[height,width,1]`	`PointCloud.CopyPointsZ()`	4 bytes	9 MB
`byte[height,width,4]`	`PointCloud.CopyColorsRGBA()`	4 bytes	9 MB
`float[height,width]`	`PointCloud.CopySNRs()`	4 bytes	9 MB
`Zivid.NET.PointXYZColorRGBA[height, width]`	`PointCloud.CopyPointsXYZColorsRGBA()`	16 bytes	37 MB
`Zivid.NET.PointXYZColorBGRA[height, width]`	`PointCloud.CopyPointsXYZColorsBGRA()`	16 bytes	37 MB
`Zivid.NET.ImageRGBA`	`PointCloud.CopyImageRGBA()`	4 bytes	9 MB

Copy selected data from GPU to system memory (Zivid-allocated)¶

If a user was only interested in the XYZ coordinates of the point cloud they would previously need to call Zivid.NET.Frame.GetPointCloud(). This function would then copy all data to the system memory. In SDK 2.0 this may be achieved faster by only calling PointCloud.CopyPointsXYZ(). Similarly, consider a use case where we only need the RGB colors from the point cloud:

1.8.1

2.0

var pointCloud = frame.GetPointCloud();
var height = pointCloud.Height;
var width = pointCloud.Width;
var pointCloudArray = pointCloud.ToArray();
float[,,] colorsRGB = new float[width, height, 3];
for (ulong i = 0; i < height; i++)
{
    for (ulong j = 0; j < width; j++)
   {
    for(size_t j = 0; j < width; j++)
    {
        colorsRGB[i, j, 0] = pointCloudArray[i, j, 3];
        colorsRGB[i, j, 1] = pointCloudArray[i, j, 4];
        colorsRGB[i, j, 2] = pointCloudArray[i, j, 5];
    }
}

Line 1: Copy XYZ + RGBA + Contrast data from GPU to system memory.
Line 6: Allocate Array with an appropriate size to hold just the RGB data.
Line 6-14: Selectively copy RGB data from one part of system memory to another.

var colorsRGBA = frame.PointCloud.CopyColorsRGBA();

Line 1: Colors are copied from the GPU and into a three-dimensional array of

bytes (byte[height,width,4]), representing a 4-channel RGBA image.

Visualize ¶

The Zivid visualization module is renamed and moved.

`Vis3D` library	→	`Visualization` library
`Zivid.NET.CloudVisualizer`	→	`Zivid.NET.Visualization.Visualizer`
`Zivid.NET.CloudVisualizer.EnableColors`	→	`Zivid.NET.Visualization.Visualizer.ColorsEnabled`
`Zivid.NET.CloudVisualizer.EnableMeshing`	→	`Zivid.NET.Visualization.Visualizer.MeshingEnabled`

1.8.1

2.0

var visualizer = new Zivid.NET.CloudVisualizer();
zivid.DefaultComputeDevice = visualizer.ComputeDevice;
...
visualizer.Show(frame);
visualizer.ShowMaximized();
visualizer.ResetToFit();
visualizer.EnableMeshing = true;
visualizer.EnableMeshing = true;

var visualizer = new Zivid.NET.Visualization.Visualizer();
...
visualizer.Show(frame);
visualizer.ShowMaximized();
visualizer.ResetToFit();
visualizer.MeshingEnabled = true;
visualizer.Run();

Save ¶

3D¶

No change to how 3D data is saved.

frame.Save("Frame.zdf");

2D¶

1.8.1	2.0
frame2D.Image<Zivid.NET.RGBA8>().Save("Image.png");	frame2D.ImageRGBA().Save("Image.png");

Misc ¶

Intrinsics¶

The Intrinsics() function is taken out of the Camera class and placed in the Experimental.NET.Calibration namespace. It now takes Camera as an argument.

Zivid.NET.Camera.intrinsics()

→

Zivid.NET.Experimental.Calibration.Calibrator.Intrinsics(Zivid.NET.Camera)

1.8.1	2.0
var intrinsics = camera.Intrinsics;	var intrinsics = Zivid.NET.Experimental.Calibration.Calibrator.Intrinsics(camera);

Environment¶

Zivid.NET.Environment.DataPath is removed.

Firmware¶

Zivid.NET.Firmware has been changed from a class to a namespace. This namespace holds a new class, Zivid.NET.Firmware.Updater, which provides firmware-update related functionality.

Zivid.Firmware

→

Zivid.NET.Firmware

Info¶

The member functions on Camera that used to get firmware version, model name, etc. have been removed. Information about the camera is now organized under Zivid.NET.CameraInfo. This is a member of Zivid.NET.Camera, accessed via Zivid.NET.Camera.Info.

1.8.1	2.0
var firmwareVersion = camera.FirmwareVersion;	var firmwareVersion = camera.Info.FirmwareVersion;
var modelName = camera.ModelName;	var modelName = camera.Info.ModelName;
var majorRevision = camera.Revision.Major; var minorRevision = camera.Revision.Minor;	var majorRevision = camera.Info.Revision.Major; var minorRevision = camera.Info.Revision.Minor;
var serialNumber = camera.SerialNumber;	var serialNumber = camera.Info.SerialNumber;
var maxDataSize = camera.UserDataMaxSizeBytes;	var maxDataSize = camera.Info.UserData.MaxSizeBytes;