Status LED Indication

Zivid 2+ camera contains three status indication LEDs:

  • Power

  • Ethernet Link

  • Ethernet Activity

The following image describes what the LED colors indicate.

Status LED indication - Zivid 2+

Note

The Speed indication LED shows the link speed between the camera and the network device it is connected to, not the image transfer speed between the camera and the PC. Suppose the camera is connected to a 10G network switch that is connected to a 1G network card. The LED will indicate a speed of 10G even if the end-to-end link speed is limited to 1G.

Zivid 2 camera contains three status indication LEDs:

  • Power

  • Ethernet Link

  • Ethernet Activity

The following image describes what the LED colors indicate.

Status LED indication - Zivid 2

Note

The Speed indication LED shows the link speed between the camera and the network device it is connected to, not the image transfer speed between the camera and the PC. Suppose the camera is connected to a 10G network switch that is connected to a 1G network card. The LED will indicate a speed of 10G even if the end-to-end link speed is limited to 1G.

Zivid One+ camera contains one status indication LED with four different indication modes:

Color

Indication

Status

Blue

Rapid blinking

No USB connection

Blue

Continuously on with short off period

USB is enumerated and the USB device drivers on the PC are installed and working

White

Continuously on with short off period

Zivid Software is communicating with the projector and “heartbeats” are being received

Red

Blinking

Error [1]

Note

Older Zivid One+ cameras have a thick black rubber gasket so indication LEDs are not visible.