Factory Reset Button

Zivid 2+

Reset (power cycle):

Intermittent press or hold for less than 5 seconds.

Reset to factory IP address:

Hold for 5 to 10 seconds until the Power LED turns green

Revert to factory installed firmware:

Hold for more than 10 seconds until the Power LED turns yellow.

Zivid 2

Warning

This article refers to the factory reset button which has a known issue listed in the Zivid Errata. Please refer to Reset Button Fails to Reset Network Configuration if you encounter issues with the factory reset button.

Reset (power cycle):

Intermittent press or hold for less than 5 seconds.

Reset to factory IP address:

Hold for 5 to 10 seconds until the Power LED turns green

Revert to factory installed firmware:

Hold for more than 10 seconds until the Power LED turns yellow.