Working Distance and Field-of-View

Check out our FOV and imaging distance calculator to find the relation between distances and FOV for the Zivid cameras.

CAD model information

The datum reference of the Zivid 2+ CAD models is at the center of the Ø5 positioning hole as shown below.

Zivid Camera Origin and Coordinate System

The Optical center is found relative to the datum reference.

CAD model information

The datum reference of the Zivid 2 CAD models is at the center of the Ø5 positioning hole as shown below.

Zivid Camera Origin and Coordinate System

The Optical center is found relative to the datum reference.

Continue reading about the Mechanical Interface of Zivid cameras.