Software Upgrade

Windows

In order to ensure that all components are properly updated, perform the following before the normal installation.

1. On your PC, navigate to Control Panel → Uninstall a program.

2. Uninstall Zivid Software.

3. Uninstall TeliCamSDK (x64).

4. Restart your PC.

Now you may follow the normal installation steps.

1. Download and run the latest Zivid Software installer.

2. Check the option to install camera drivers.

   Note

   You will be notified if the drivers are already installed.

3. Check the option to install GenICam GenTL Producer if you plan on using HALCON software.

   Caution

   GenICam/HALCON support is experimental.

   

4. Once the installation is complete, re-plug the camera.

   Note

   The first time TeliCamSDK (x64) driver is installed you may have to reboot your computer. Please accept if prompted to reboot.

5. For Zivid Two, after the installation, proceed to Zivid Two Network Configuration.

Ubuntu

1. Open a terminal window by pressing Ctrl + Alt + T keys on the keyboard.

   1. Create a temporary folder:

      mkdir Zivid
      
      cd Zivid
      

   2. Download all *.deb packages:

      Ubuntu 22.04

      wget \
      https://www.zivid.com/hubfs/softwarefiles/releases/2.8.1+dd4dffea-1/u22/zivid-telicam-driver_3.0.1.1-3_amd64.deb \
      https://www.zivid.com/hubfs/softwarefiles/releases/2.8.1+dd4dffea-1/u22/zivid_2.8.1+dd4dffea-1_amd64.deb \
      https://www.zivid.com/hubfs/softwarefiles/releases/2.8.1+dd4dffea-1/u22/zivid-studio_2.8.1+dd4dffea-1_amd64.deb \
      https://www.zivid.com/hubfs/softwarefiles/releases/2.8.1+dd4dffea-1/u22/zivid-tools_2.8.1+dd4dffea-1_amd64.deb
      

      Ubuntu 20.04

      wget \
      https://www.zivid.com/hubfs/softwarefiles/releases/2.8.1+dd4dffea-1/u20/zivid-telicam-driver_3.0.1.1-3_amd64.deb \
      https://www.zivid.com/hubfs/softwarefiles/releases/2.8.1+dd4dffea-1/u20/zivid_2.8.1+dd4dffea-1_amd64.deb \
      https://www.zivid.com/hubfs/softwarefiles/releases/2.8.1+dd4dffea-1/u20/zivid-studio_2.8.1+dd4dffea-1_amd64.deb \
      https://www.zivid.com/hubfs/softwarefiles/releases/2.8.1+dd4dffea-1/u20/zivid-tools_2.8.1+dd4dffea-1_amd64.deb
      

      Ubuntu 18.04

      wget \
      https://www.zivid.com/hubfs/softwarefiles/releases/2.8.1+dd4dffea-1/u18/zivid-telicam-driver_3.0.1.1-3_amd64.deb \
      https://www.zivid.com/hubfs/softwarefiles/releases/2.8.1+dd4dffea-1/u18/zivid_2.8.1+dd4dffea-1_amd64.deb \
      https://www.zivid.com/hubfs/softwarefiles/releases/2.8.1+dd4dffea-1/u18/zivid-studio_2.8.1+dd4dffea-1_amd64.deb \
      https://www.zivid.com/hubfs/softwarefiles/releases/2.8.1+dd4dffea-1/u18/zivid-tools_2.8.1+dd4dffea-1_amd64.deb
      

      Ubuntu 16.04

      Note

      Support for Ubuntu 16.04 is removed since SDK 2.7. To see Ubuntu 16.04 instructions for an earlier SDK version, change the Knowledge Base version in the top left corner.

   3. Install all packages:

      sudo apt install ./*.deb
      

   4. Once the installation is complete, re-plug the camera.

   5. For Zivid Two, after the installation, proceed to Zivid Two Network Configuration.